Mixercase with sloping side for even better handling of the mixer For all 19" mixers up to 8 U With 2 high-quality spring locks High-quality workmanship with 7 mm wall thickness Several layers of wood for highest stability Black surface finish Interior upholstered With three-leg, medium sized steel ball corners Maximum load: 8 kg Strength: 7 mm Outer dimensions (WxDxH): approx. 530 x 440 x 240 mm Inner dimensions: Mounting width: 490 mm, 19'' Mounting height: approx. 205 mm Mounting height front: approx. 110 mm Mounting depth: approx. 405 mm, 8 u Mounting depth rear: approx. 180 mm Outer dimensions/corners: approx. 55 mm Weight: approx. 8.5 kg Aluminum case angle 25 mm With 4 rubber feet Robust handle Screws, rack nuts and washers included (18 pieces each)
Flightcase for 19" units suitable for 483 mm units (19"), e.g. controllers and mixers, with 10 Uupward tilted profile rails (approx. 13°) for top-operated unitsinterior upholstered with foam (black)high-quality workmanship with 6 mm plywood multilayered glued, blackAluminum profile frames (30 mm) with rounded edgesremovable coverthree-leg, medium-sized steel ball corners4 high-quality lockable butterfly locks4 steel-enforced rubber feetpadded carrying handleDelivery includes mounting screws, rack screws and flat washersMaximum load: 25 kg Color: Black laminated Material: Glued plywood 6 mm Outer dimensions/corners approx.: 55 mm Strength: 6 mm Mounting width: 483 mm (ca. 19") Mounting height: ca. 450 mm (10 HE) Mounting depth min.: 110 mm Width: 55 cm Height: 24 cm Depth: 55 cm Weight: 8,70 kg Inside dimensions: Mounting width: 490 mm, 19" Mounting height: 190 mm Mounting height front: ca. 110 mm Mounting height back: ca. 180 mm Mounting depth: 510 mm, 10 U
Flight case with 4 height units vertical 10 height units horizontal Stable ROAD-version 2 stable steel handles for carrying 4 stable butterfly-locks 4 steel enforced rubberfeet, 2 removeable covers Removeable back-panel (w x h) 320 x 200 mm 10 mm plywood with black synthetic surfaceMaximum load: 50 kg Strength: 10 mm Outside dimensions (WxDxH): approx. 575 x 535 x 300 mm Inside dimensions: Mounting width: 482 mm Mounting height: approx. 180 mm (4u) Mounting depth: approx. 450 mm (10u) Outer dimensions/corners: approx. 55 mm Weight: approx. 10 kg
Professional solution for a complete DJ setput; this heavy-duty case accommodates your PA, a double CD player and a 483 mm mixer (19") and two turntables and can be assembled and disassembled without much effortSlidable top part with 4 U mounting facility for e.g. control units of double CD players or lighting units and upward tilted profile rails with 8 U for top-operated units e.g. mixersBottom part with 16 U mounting facility for e.g. CD mechanisms, amplifiers, effect unitsRemovable front cover with folding table leg fits two turntablesRemovable rear coversCable outlets on the sides in the bottom partHigh-quality workmanship with 9 mm plywood multilayered glued, black laminatedAluminum profile framesThree-leg, large steel ball corners4 castors (100 mm), 2 of which with locking brakesHinged, chrome-plated case handlesButterfly locks with locking functionDelivery includes mounting screwsMaximum load: 100 kg Outer dimensions (LxWxH): 575 x 560 x 1215 mm Weight: 39 kg
Flightcase with castorsProfessional solution for a complete DJ setput; this heavy-duty case accommodates your PA, a double CD player, a 483 mm mixer (19"), effect units, and further 483 mm units (19")Top part with upward tilted profile rails with 10 U for top-operated units e.g. mixers, control units of double CD players or lighting unitsBottom part with 12 U mounting facility for e.g. CD mechanisms, amplifiers, effect unitsRemovable top coverRemovable front and rear coverHigh-quality workmanship with 9 mm plywood multilayered glued, black laminatedAluminum profile frames (30 mm) with rounded edgesThree-leg, large steel ball cornersIncl. wheel board (17 mm) with 4 castors, 2 of which have brakes4 rugged, hinged case handles5 butterfly locksChromium plated corners, handles and butterfly locksDelivery includes mounting screwsTransport aid: With wheelsAdditional dimensions: Door rear panel 55 x 40 cmHousing design: 12 UMaximum load: 50 kgColor: Black laminatedMaterial: Glued plywood 9 mmOuter dimensions/corners approx.: 55 mmAdditional dimensions: Door rear panel 55 x 40 cmMounting width: 483 mm (ca. 19")Mounting height: approx. 528 mm (12 U)Mounting depth:480 mmHousing design: 12 UWidth: 56 cmHeight: 91 cmDepth: 60,5 cmWeight: 29,90 kg
Flightcase for 19" units suitable for 483 mm units (19"), e.g. controllers and mixers, with 12 Uupward tilted profile rails (approx. 13°) for top-operated unitsinterior upholstered with foam (black)high-quality workmanship with 7 mm plywood multilayered glued, blackAluminum profile frames (25 mm) with rounded edgesremovable coverthree-leg, medium-sized steel ball corners2 high-quality lockable butterfly locks4 steel-enforced rubber feetpadded carrying handleDelivery includes mounting screwsHousing design: 12 UMaximum load: 25 kg Color: Black laminated Material: Glued plywood 7 mm Outer dimensions/corners approx.: 55 mm Strength: 7 mm Mounting width: 483 mm (ca. 19") Mounting height: ca. 545 mm (12 HE) Mounting depth min.: 90 mm Housing design: 12 U Width: 55 cm Height: 24 cm Depth: 61,5 cm Weight: 9,20 kg Inside dimensions: Mounting width: 490 mm, 19" Mounting height: 190 mm Mounting height front: 90 mm Mounting depth rear: 180 mm
