The ADJ COB Cannon LP200ST is a powerful and flexible professional wash lighting fixture that can be used for a wide variety of applications. It harnesses the power of an efficient 200-Watt COB (Chip On Board) RGBAL (red, green, blue, amber and lime) LED light source, which generates a potent and even output with no color shadows. This efficient light engine combines red, green, blue, amber and lime LED chips to allow the creation of a huge gamut of colors as well as white light with a variable color temperature of between 2300K and 9900K. The inclusion of the lime LED chip helps certain colors to appear more vivid and also boosts the CRI to in excess of 90. Offering a wide native beam angle of 80-degrees, allowing a large area to be washed with vibrant colored light, the fixture is also supplied with a useful lens kit. This comprises both 40-degree and 50-degree lens options, which easily and securely clip to the front of the fixture to provide a narrower beam angle when required. For easy integration into an existing control system, both 3-pin and 5-pin DMX input and output sockets are included on the unit’s rear panel. There are also locking power input and output sockets, which can be used to connect up to three fixtures to a single power outlet. It is also supplied with a flexible scissor yoke, which can either be used as a hanging bracket or floor stand, and barn doors for directing the light output are available as an optional accessory. Specifications: Source:• 1x 200-Watt COB (Chip on Board), RGBAL (Red, Green, Blue, Amber & Lime), LED Engine• LED Engine Life Rating: Approximately 50,000 hrs• Light Output: ?• CRI: >90• Color Temperature: 2300~9900K Optics:• 80-degree beam angle • Includes lens kit to change to 40-degrees or 50-degrees beam angle Connections:• 3-pin & 5-pin XLR connectors for DMX data linking• Indoor locking power In & Out connections to daisy chain power (up to 3 fixtures)• USB Service Port Control:• 10 DMX Channel modes (5, 8, 9, 10Ch-A, 10CH-B, 11, 12, 14, 17 and 21CH)• Linear color temperature control via DMX• Built-in color temperature presets accessible via DMX• 64 built-in color macros• 4-button digital DMX display on rear panel • Compatible with the ADJ UC IR remote control (sold separately)• LED pulse and strobe effect• Electronic Dimming: 0 - 100%• 6 selectable Dim Modes (Standard, Stage, TV, Architectural & Theatre)• 4 selectable Dim Curves (Square, Linear, Inv. Squa & S.Curve)• Refresh Rate:1KHz Features:• Primary / Secondary Mode• Flicker Free operation (No flickering on camera)• Produces powerful, smooth RGBAL color mixing with rich palettes of color• Scissor yoke allows fixture to be mounted on truss or set on the ground• Optional Barn Doors sold separately Electrical:• Auto sensing power supply: AC 100V/60Hz - 240V/50Hz • Power Draw: 175W max• Daisy chain up to 3 fixtures maximum Dimensions & Weight:• Dimensions (LxWxH): 330x256x190mm (with bracket); 218.5x190x190mm (without bracket)• Weight: 4.2 kg.

The ADJ COB Cannon Wash DW ST is a shorter version of the popular COB Cannon Wash fixture. It uses advanced Warm White / Cool White COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no WW/CW shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash DW ST is a dual WW/CW 2-In-1). It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.The COB Cannon Wash DW ST comes in a black casing and has massive 80-degree beam angle. Easily replaceable 40-degree and 50-degree lens are included so that the beam angle may be changed.It has 6 DMX Channel modes for programming flexibility, built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, 3-pin & 5-pin DMX and powerCon power daisy-chaining, and a 4-button DMX display. COB Cannon Wash DW ST may run in its stand-alone mode from built-in programs, sound actively or from a DMX controller.OPTICAL:Light Source: 1x 150-Watt COB (Chip on Board) Warm White/Cool White LED (2-IN-1) - rated at approximately 50,000 hrs.CRI: Over 90Light Output: 891 LUX @3M (CW + WW @ 40-degree beam), 711 LUX @3M (CW + WW @ 50-degree beam), 410 LUX @3M (CW + WW @ 80-degree beam)80-degree beam angleIncludes lens kit to change to 40-degrees or 50-degrees beam angleCONNECTIONS:3-pin & 5-pin connectors for DMX linkingpowerCon AC IN/OUT to daisy chain power (up to 5 fixtures)CONTROL:Variable white control: 3200K - 6400K6 DMX Channel modes (1, 2, 3, 4, 5, 6 Ch.)8 warm white / cool white built-in color macros4-button digital DMX display on rear panel Compatible with wireless remote control (sold separately)LED pulse and strobe effectElectronic Dimming: 0 - 100%5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)Refresh Rate:1KHzFEATURES:Flicker Free operation (No flickering on camera)Use as Wash/par or Pixel Mapped for a stunning visual effectScissor yoke allows fixture to be mounted on truss or set on the groundOptional Barn Doors (BAR001) sold separatelyRun all night – No duty cycleELECTRICAL:Auto sensing power supply: AC 100V/60Hz - 240V/50Hz Power Draw: 132W maxDaisy chain up to 5 fixtures maximumDIMENSIONS / WEIGHT:Dimensions (LxWxH): 13” x 10” x 7.5” / 330x256x190mm (with bracket); 8.75” x 7.5” x 7.5” / 218.5x190x190mm (without bracket)Weight: 9 lbs. / 4.1 kg.

The ADJ COB Cannon Wash ST Pearl is a shorter version of the popular COB Cannon Wash Pearl fixture. It uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of retail stores, stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash ST is a QUAD RGBA 4-In-1. It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.The COB Cannon Wash ST Pearl comes in a white casing and has massive 80-degree beam angle. Easily replaceable 40-degree and 50-degree lenses are included so that the beam angle may be changed.It has 7 DMX Channel modes for programming flexibility, built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, 3- & 5-pin DMX and powerCON power daisy-chaining and a 4-button DMX display. COB Cannon Wash ST Pearl may run in its stand-alone mode from built-in programs, sound actively or from a DMX controller.OPTICAL:Light Source: 1x 150-Watt COB (Chip on Board) Quad LED (RGBA: 4-IN-1, rated at approximately 50,000 hrs)Light Output: 1970 LUX @2M; 474 LUX @4M (40-degree beam), 1472 LUX @2M; 373 LUX @ 4M (50-degree beam), 996 LUX @2M; 238 LUX @4M (80-degree beam)80-degree beam angleIncludes lens kit to change to 40-degrees or 50-degrees beam angleCONNECTIONS:3-pin & 5-pin connectors for DMX linkingpowerCon AC IN/OUT to daisy chain power (up to 5 fixtures)CONTROL:7 DMX Channel modes (3,4,5,6,7,9,10 Ch.)64 built-in color macros4-button digital DMX display on rear panelCompatible with wireless remote control (sold separately)LED pulse and strobe effectElectronic Dimming: 0 - 100%5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)Refresh Rate:1KHzFEATURES:Flicker Free operation (No flickering on camera)Produces powerful, smooth RGBA color mixing with rich palettes of colorUse as Wash/par or Pixel Mapped for a stunning visual effectScissor yoke allows fixture to be mounted on truss or set on the groundOptional Barn Doors sold separatelyRun all night – No duty cycleELECTRICAL:Auto sensing power supply: AC 100V/60Hz - 240V/50Hz Power Draw: 132W maxDaisy chain up to 5 fixtures maximum DIMENSIONS / WEIGHT:Dimensions (LxWxH): 13” x 10” x 7.5” / 330x256x190mm (with bracket); 8.75” x 7.5” x 7.5” / 218.5x190x190mm (without bracket)Weight: 9 lbs. / 4.1 kg.

The ADJ Lighting Element H6 Pak is a beneficial all-in-one event up lighting system that offers a powerful and versatile up lighting solution for indoor and temporary outdoor events. This package includes six IP54-rated, battery-powered, wireless DMX, black fixtures that come in a durable flight case with an on-board battery charging solution. It also comes with one UCIR24 wireless remote for easy control.The Element H6 Pak fixtures boast four 20-watt RGBAW+UV LEDs with a life expectancy rated at 50,000 hours. With a beam angle of 17.6° and a field angle of 28.7°, these fixtures produce a LUX output of 1117 @ 2M and 298 @ 4M, making them perfect for stage up lighting and wall washing.In addition to its impressive optical features, the Element H6 Pak offers a range of convenient and easy-to-use features. It includes a built-in kickstand to angle the fixture when placed on the floor, a 4-touch button OLED display inside cover panel, and a battery charge indicator on each fixture.The wireless DMX control protocol allows you to control your lighting system from anywhere in the room, and the 63 built-in color macros make it easy to create stunning lighting effects. With its variable RGBAW+UV color mixing and smooth dimming capabilities, the Element H6 Pak offers a seemingly unlimited color palette.This lighting system also boasts an energy-saving mode and a battery life of up to 6 hours in normal mode and 12 hours in energy-saving mode (single color). Each fixtures is compact and lightweight and comes in a robust IP54-rated casing with partial protection from dust and water splashes. Each fixture has a weight of 5.3 lbs (2.4kg), making it easy to transport and set up for your event.Overall, the ADJ Lighting Element H6 Pak is an exceptional lighting system that offers power, versatility, and convenience for all your event lighting needs. With its impressive features and durable design, this lighting system is perfect for event producers, and anyone looking to add some excitement and style to their event.SPECIFICATIONElement H6 Pak includes:• (6) Element H IP Black Fixtures• (1) Element H6 FC charging Flight Case• (6) Mirage Q6 IPCB Charging bases and power supplies• (1) UCIR24 Wireless Infrared Controller• (1) IP65 Locking Power CableElement H6 Pak Features:• Houses / Transports and Charges (6) Element H IP™ fixturesElement H6 Pak Dimensions / Weight (loaded case with 6 fixtures):• Length: 671mm• Width: 461mm• Vertical Height: 451mm• Loaded Weight: 38.4kgPak Electrical / Thermal:• Power Input: AC100VAC~240VAC, 50/60Hz• IP65 Power Locking Input and Output• Max Power Consumption: 200 Watts• Power Draw: 3A max• Charge status indicator• -20°C to 45°C• 4 x 20-Watt RGBAW+UV LEDs (6-in-1 - Red, Green, Blue, Amber White & UV)• Life expectancy: rated at 50,000 hrs.• LUX: 1117 @ 2M; 298 @ 4M• Beam angle: 17.6°• Field angle: 28.7°Connection:• DMX: Wireless DMX• Contact Charging system. *Charging base and power supply includedControl:• Control protocol: WiFly EXR Wireless DMX• 7 DMX Channel modes: 6, 8, 9, 12, 14, 15 or 17 channels• Remote control: Wireless DMX, UC-IR24 (Included)• 5 Operational modes: RGBAW+UV Dimmer Mode;Auto Run Mode (13 programs, & 1 color/fade combo mode); Static Color mode; and Wireless DMX ControlFeatures:• IP54 Rated: partial protection from dust and water splashes• Built-in kickstand to angle fixture when sitting on the floor• 4-touch button OLED display inside cover panel• Built-in WiFly EXR wireless DMX with signal LED indicator• 63 built-in Color Macros• Variable RGBAW+UV color mixing offers a smooth, seemingly unlimited color palette - Great for Stage or Wall Washing!• LED pulse and strobe effect (0.2Hz-11Hz)• Flicker Free Operation• Electronic Dimming: 0 - 100% with 6 dim modes and 4 dim curves• Run all night - No duty cycle• Battery charge indicator on each fixture• Energy Save ModeBattery:• Battery Type: fixed polymer lithium battery• Battery Energy: 59.2WH (Watt Hours)• Battery Weight: 0.24 kg• Battery Voltage: 14.8V• Battery Capacity: 4000mAh (Typical Capacity)• Total Lithium Ion Cells: 4 pieces• Battery Wrap Material: PVC sleeving + highland barley paper• Battery Charge Time: 6 Hours• Battery Life: 6 Hours in Normal mode and 12 hours in Energy save mode(single color)Electrical:• Power Draw Total (All LED's @ Full On): 20W• Voltage operation: DC17VDimensions / Weight:• Dimensions (LxWxH): 140 x 140 x 190.5mm• Weight: 2.4kgCertifications:• cETLus pending• CE pending• IP54 Outdoor rated

The ADJ Lighting Element H6 Pak is a beneficial all-in-one event up lighting system that offers a powerful and versatile up lighting solution for indoor and temporary outdoor events. This package includes six IP54-rated, battery-powered, wireless DMX, Chrome fixtures that come in a durable flight case with an on-board battery charging solution. It also comes with one UCIR24 wireless remote for easy control.The Element H6 Pak fixtures boast four 20-watt RGBAW+UV LEDs with a life expectancy rated at 50,000 hours. With a beam angle of 17.6° and a field angle of 28.7°, these fixtures produce a LUX output of 1117 @ 2M and 298 @ 4M, making them perfect for stage up lighting and wall washing.In addition to its impressive optical features, the Element H6 Pak offers a range of convenient and easy-to-use features. It includes a built-in kickstand to angle the fixture when placed on the floor, a 4-touch button OLED display inside cover panel, and a battery charge indicator on each fixture.The wireless DMX control protocol allows you to control your lighting system from anywhere in the room, and the 63 built-in color macros make it easy to create stunning lighting effects. With its variable RGBAW+UV color mixing and smooth dimming capabilities, the Element H6 Pak offers a seemingly unlimited color palette.This lighting system also boasts an energy-saving mode and a battery life of up to 6 hours in normal mode and 12 hours in energy-saving mode (single color). Each fixtures is compact and lightweight and comes in a robust IP54-rated casing with partial protection from dust and water splashes. Each fixture has a weight of 5.3 lbs (2.4kg), making it easy to transport and set up for your event.Overall, the ADJ Lighting Element H6 Pak is an exceptional lighting system that offers power, versatility, and convenience for all your event lighting needs. With its impressive features and durable design, this lighting system is perfect for event producers, and anyone looking to add some excitement and style to their event.SPECIFICATIONElement H6 Pak includes:• (6) Element H IP Chrome Fixtures• (1) Element H6 FC charging Flight Case• (6) Mirage Q6 IPCB Charging bases and power supplies• (1) UCIR24 Wireless Infrared Controller• (1) IP65 Locking Power CableElement H6 Pak Features:• Houses / Transports and Charges (6) Element H IP™ fixturesElement H6 Pak Dimensions / Weight (loaded case with 6 fixtures):• Length: 671mm• Width: 461mm• Vertical Height: 451mm• Loaded Weight: 38.4kgPak Electrical / Thermal:• Power Input: AC100VAC~240VAC, 50/60Hz• IP65 Power Locking Input and Output• Max Power Consumption: 200 Watts• Power Draw: 3A max• Charge status indicator• -20°C to 45°C• 4 x 20-Watt RGBAW+UV LEDs (6-in-1 - Red, Green, Blue, Amber White & UV)• Life expectancy: rated at 50,000 hrs.• LUX: 1117 @ 2M; 298 @ 4M• Beam angle: 17.6°• Field angle: 28.7°Connection:• DMX: Wireless DMX• Contact Charging system. *Charging base and power supply includedControl:• Control protocol: WiFly EXR Wireless DMX• 7 DMX Channel modes: 6, 8, 9, 12, 14, 15 or 17 channels• Remote control: Wireless DMX, UC-IR24 (Included)• 5 Operational modes: RGBAW+UV Dimmer Mode;Auto Run Mode (13 programs, & 1 color/fade combo mode); Static Color mode; and Wireless DMX ControlFeatures:• IP54 Rated: partial protection from dust and water splashes• Built-in kickstand to angle fixture when sitting on the floor• 4-touch button OLED display inside cover panel• Built-in WiFly EXR wireless DMX with signal LED indicator• 63 built-in Color Macros• Variable RGBAW+UV color mixing offers a smooth, seemingly unlimited color palette - Great for Stage or Wall Washing!• LED pulse and strobe effect (0.2Hz-11Hz)• Flicker Free Operation• Electronic Dimming: 0 - 100% with 6 dim modes and 4 dim curves• Run all night - No duty cycle• Battery charge indicator on each fixture• Energy Save ModeBattery:• Battery Type: fixed polymer lithium battery• Battery Energy: 59.2WH (Watt Hours)• Battery Weight: 0.24 kg• Battery Voltage: 14.8V• Battery Capacity: 4000mAh (Typical Capacity)• Total Lithium Ion Cells: 4 pieces• Battery Wrap Material: PVC sleeving + highland barley paper• Battery Charge Time: 6 Hours• Battery Life: 6 Hours in Normal mode and 12 hours in Energy save mode(single color)Electrical:• Power Draw Total (All LED's @ Full On): 20W• Voltage operation: DC17VDimensions / Weight:• Dimensions (LxWxH): 140 x 140 x 190.5mm• Weight: 2.4kgCertifications:• cETLus pending• CE pending• IP54 Outdoor rated

The ADJ Element ST HEX is the of the latest addition to ADJ’s Element series of battery powered wireless LED up-lighters. Building on the success of ADJ’s popular Element Hex, the new model features an extremely compact design as well as a full-color touch screen display for extremely easy setup and DMX addressing. Utilizing the power of 4 x 6-Watt RGBAW+UV LEDs to generate a powerful wash of color with a 20-degree beam angle, the fixture features a built-in rechargeable battery that offers up to 8 hours of continuous operation as well as ADJ’s WiFly EXR wireless DMX connectivity. Cleverly designed with a built-in variable-angle kick-stand and convenient carry handle, the unit is ideal for production companies, décor specialists and mobile entertainers.Optical:4 x 6-Watt RGBAW+UV LEDs (6-in-1 - Red, Green, Blue, Amber, White & UV)Life expectancy: rated at 50,000 hrs.LUX: >412@3M(9.8 ft.)Beam angle: 20-degreeConnection:12.6VDC Power InputWith Wired Digital Communication NetworkControl:Control protocol: WiFLY EXR wireless DMX5 DMX Channel modes: 6, 7, 8, 11 & 12Remote control: WiFLY EXR DMX and UC-IR5 Operational modes: RGBAW+UV Dimmer Mode; Sound Active mode; Auto Run Mode (16 color change modes, 16 color fade modes, & 1 color/fade combo mode); Static Color mode; and DMX ControlledFeatures:Selectable, English or Spanish User MenuBuilt-in kickstand to angle figure while it’s on the floorDMX menu touch screen display on rear panelBuilt-in WiFLY EXR wireless DMX: Up to 2,500 feet (760M) when used with ADJ’s WiFLY EXR Battery Transceiver63 built-in Color MacrosVariable RGBAW+UV color mixing offers a smooth, seemingly unlimited color palette - Great for Stage or Wall Washing!LED pulse and strobe effect (0.1Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleEnergy Save Mode to preserve battery lifeCarry handle and snoot to hide handle and LED lensesElectrical:Power Draw Total (All LED’s @ Full On): 45W, 0.5A @ 120V/60Hz, 42W, 0.2A @ 220V/50Hz,Multi-voltage operation: AC 100-240V, 50/60HzDimensions / Weight:Dimensions (LxWxH): 5” x 4.93” x 5.6” / 127 x 125 x 143mmWeight: 3.5 lbs. / 1.6kg.Battery:Battery Type: Fixed Lithium BatteryBattery Energy: 73.26WH (Watt Hours)Battery Weight: 0.42 kg.Battery Voltage: 11.1VBattery Capacity: 6.6AHTotal Lithium Ion Cells: 9 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 5 Hours (With POWER switch On)Battery Life: 4 Hours Full On, 6 and 8 HourEnergy Save operation modes (Full Charge)Certifications:IP20 Indoor rated

Pak consists of:4 pcs ADJ element ST HEX1 pc Airstream Bridge DMX

The Encore Burst 200 is an IPX4 rated, high intensity dual lens audience blinder/strobe. It’s powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array. The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.Light Source:2x 110W Warm White CREE COB (Chip On Board) LEDs2,700K Color Temperature (1,200K Tungsten Mode)50-degree Beam AngleCRI: 8112249 LUX @ 1M; 490 LUX @ 5M50,000 Hour Average LED LifeFeatures:Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail system on the fixturesDMX Modes: 6RDM compatible (Remote Device management)Dimming Curve Modes: 6Dimming: 0 - 100% each modulePixel ControlStrobe EffectAdjustable LED Refresh Rate (900-25,000Hz)Adjustable Gamma Brightness (2.0-2.8)With Wired Digital Communication NetworkConnections:Data Input: 5pin DMX In/OutPower Input: IP65 Locking Power In/Out (with protective rubber caps)Safety Cable LoopElectrical:100-240V 50Hz/60Hz (Auto Sensing)Power Linking: 4 Fixtures @120V | 8 Fixtures @240VMax Power Consumption: 235W IPX4 Rated:X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture offers protection from a splash of water in any directionDimensions / Weight:Length: 15.7” (400mm)Width: 7.9” (200.5mm)Height: 8.5” (215.5mm)Weight: 15 lbs. (6.8kg)

The ADJ Lighting Mirage Q6 PAK is an all-in-one event up lighting system with six IP65 rated, battery powered fixtures and a durable flight case with an on-board battery charging solution.Each Mirage Q6 IP fixture is powered by four 10W RGBA LEDs that produce a 15-degree beam angle. The fixture is IP65 rated and is waterproof; suitable for temporary use outdoors with protection against the elements (rain, snow, dust and sand). Built-in WiFLY EXR wireless DMX allows for the fixtures to communicate with a lighting controller, also with WiFLY EXR wireless DMX, up to 2,500 feet (700M) away.Ideal for wall washing, Mirage Q6 IP fixtures are all fitted with an integral carry handle and built-in feet which mean they can simply be dropped in place and are ready to go. They also feature a built-in kickstand which allows the beam to be easily angled inwards towards a wall if required. This creates a more intense wash and minimizes light spill onto the ceiling above.Each fixture has an alarm system with on/off controls. If someone picks up the fixture with the alarm system on, the fixture will make a beeping sound and strobe in red.The robust battery will operate up to 40 hours on a single color (20 hours changing colors). The battery charge time is 7 hours.Sold in a system of six portable LED battery powered fixtures inside a charging flight case.FIXTURE SPECIFICATIONSSource:4 x 10-Watt RGBA LEDs (4-in-1 - Red, Green, Blue & Amber)50,000 Hour Average LifeLUX: 9903 @ 2M; 2303 @ 4MOptics:11-degree beam angleControl:11 DMX Channel modes: 4, 6, 7, 8, 9A, 9B, 10, 11, 12, 15 or 18 channelsControl protocol: WiFLY EXR Wireless DMX, UC-IR (Included)5 Operation modes: RGBA Dimmer Mode, Auto Run Mode (13 programs, & 1 color/fade combo mode), Static Color mode and Wireless DMX ControlLED pulse and strobe effect (0.2Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 6 dim modes and 4 dim curvesRun all night No duty cycleColor:RGBA Color mixing64 built-in Color MacrosConstruction:Metal housing with chrome finishIP65 Rated for temporary outdoor useBuilt-in kickstand to angle fixture when sitting on the floorCarrying handleBuilt-in alarm system with On/OffBattery charge indicator on each fixtureElectrical:Power Input: DC 17.3VAmperage Draw: 2A40W Max Power Consumption (each unit)Battery Type: Fixed lithium batteryBattery Energy: 162.8WH (Watt Hours)Battery Weight: 0.84 kg.Battery Voltage: 14.8VBattery Capacity: 11000mAh (Typical Capacity) Battery Charge Time: 7 HoursBattery Life: 20 hours (changing colors); 40 hours (single color) Connections:Contact Charging system. 6x Charging bases and power supplies included in flight case Dimensions & Weight:Length: 143mmWidth: 143mmHeight: 211mmWeight: 2.8kg. PAK SPECIFICATIONS:Mirage Q6 PAK Includes:6 MIRAGE Q6 IP Fixtures1 MIRAGE Q6 FC Flight Case6 MIRAGE Q6 IPCB Charging bases and power supplies1 UC-IR Wireless Infrared Controller1 IP65 Locking Power Cable PAK Features:Houses / Transports and Charges 6 MIRAGE Q6 IP™ fixtures PAK Dimensions & Weight (loaded case with 6 fixtures):Length: 672mmWidth: 461mmHeight: 449mmLoaded Weight: 44.4 kg PAK Electrical:Power Input: AC100VAC~240VAC, 50/60Hz IP65 Power Locking Input and OutputMax Power Consumption: 400 WattsPower Draw: 4ACharge status indicator-10°C to 45°C

The ADJ Lighting Mirage Q6 Pak Black is an all-in-one event up lighting system with six (6) IP65 rated, for outdoor or indoor use, battery powered fixtures and a durable flight case with an on-board battery charging solution. Each Mirage Q6 IP Black fixture is powered by four (4) 10W RGBA LEDs that produce a 11-degree beam angle. The fixture is IP65 rated and is waterproof; suitable for temporary use outdoors with protection against the elements (rain, snow, dust and sand). Built-in WiFLY EXR wireless DMX allows for the fixtures to communicate with a lighting controller, also with WiFLY EXR wireless DMX, up to 2,500 feet (700M) away. Ideal for wall washing, Mirage Q6 IP Black fixtures are all fitted with an integral carry handle and built-in feet which mean they can simply be dropped in place and are ready to go. They also feature a built-in kickstand which allows the beam to be easily angled inwards towards a wall if required. This creates a more intense wash and minimizes light spill onto the ceiling above. Each fixture has an alarm system with on/off controls. If someone picks up the fixture with the alarm system on, the fixture will make a beeping sound and strobe in red. The robust battery will operate up to 40 hours on a single color (20 hours changing colors). The battery charge time is 7 hours.Specifications Mirage Q6 Pak includes:(6) MIRAGE Q6 IP Black Fixtures(1) MIRAGE Q6 FC Flight Case(6) MIRAGE Q6 IPCB Charging bases and power supplies(1) UC-IR Wireless Infrared Controller(1) IP65 Locking Power Cable Mirage Q6 Pak Features:Houses / Transports and Charges (6) MIRAGE Q6 IP™ BLACK fixtures MirageQ6 Pak Dimensions & Weight (with 6 fixtures):Length: 26.4” (671mm)Width: 18.2” (461mm)Vertical Height: 18.1” (459mm)Loaded Weight: 97.9 lbs. (44.4 kg) Pak Electrical & Thermal:Power Input: AC100VAC~240VAC, 50/60Hz IP65 Power Locking Input and OutputMax Power Consumption: 400 WattsPower Draw: 4ACharge status indicator14°F to 113°F (-10°C to 45°C) MIRAGE Q6 IP BLACK FIXTURE Source:4 x 10-Watt RGBA LEDs (4-in-1 - Red, Green, Blue & Amber)50,000 Hour Average Life**May vary depending on several factors including but not limited to:Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming. Photometrics:LUX: 9903 @ 2M; 2303 @ 4M Optics:11-degree beam angle Control & Connections:Control protocol: WiFLY EXR Wireless DMX11 DMX Channel modes: 4, 6, 7, 8, 9A, 9B, 10, 11, 12, 15 or 18 channelsRemote control: WiFLY EXR DMX, UC-IR24 (Included)5 Operation modes: RGBA Dimmer Mode; Auto Run Mode (13 programs, & 1 color/fade combo mode); Static Color mode; and Wireless DMX ControlContact Charging system. 6x Charging bases and power supplies included in flight case Features:IP65 Outdoor RatedBuilt-in kickstand to angle fixture when sitting on the floor4-touch button OLED display on rear panel Built-in WiFLY EXR wireless DMX: Up to 2,500 feet (760M) when used with ADJ’s WiFLY EXR Battery Transceiver64 built-in Color MacrosVariable RGBA color mixing offers a smooth, seemingly unlimited color palette - Great for Wall Washing!LED pulse and strobe effect (0.2Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 6 dim modes and 4 dim curvesRun all night – No duty cycleEnergy Save ModeBuilt-in alarm system with On/Off Battery charge indicator on each fixtureDie-cast aluminum housing Battery:Battery Type: Fixed lithium batteryBattery Energy: 162.8WH (Watt Hours)Battery Weight: 0.84 kg.Battery Voltage: 14.8VBattery Capacity: 11000mAh (Typical Capacity) Total Lithium Ion Cells: 20 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 7 HoursBattery Life: 14 hours (When color changing in Battery Saver Mode 14); 40 hours (When set to a single color in Battery Saver Mode 14) Battery Saver Mode 14 is available in software V1.03> Dimensions & Weight:Length: 143.2mmWidth: 143.2mmVertical Height: 211mmWeight: 4.01kg Electrical & Thermal:Power Input: DC 17.3VPower Draw: 2A40W Max Power Consumption (each unit)-10°C to 45°C

White Housing Kit for MOD 100 Series LED PARs :MOD HEX100MOD QW100MOD TW100

White Housing Kit for MOD 60 Series LED PARs :MOD QA60

The ADJ Lighting Modular Series LED Pars allow lighting designers more flexibility when it comes to features, plus more power to create brilliant washes for stages, installations or mobile events. The Mod Pars are “modular” in two ways. First, the body moves so that you can create a snoot to eliminate side glare if desired. Second, designers can remove the black metal housing and replace it with a pearl white housing kit. In this way, LED Par owners can switch between black or white fixtures depending on the application without having to inventory two different fixtures.The MOD QW100 comes equipped with seven 15-Watt RGBW (4-IN-1) LED diodes (for a total output of 105W), a scissor yoke and three interchange frost filters that are easily replaceable by thumb screws. The 17-degree standard beam may be changed on the fly to 20, 40 or 60-degrees.SpecificationsLight Source:7x 15-Watt RGBW (4-IN-1 – Red, Green, Blue & White) LEDs50,000 Hour Average LED LifeFeatures:Unique modular design: metal housing moves to offer a snoot to eliminate side glareBlack, gloss metal house may be removed and replaced with pearl white housing kit (sold separately)Includes 3 frost filters to change beam angle: 20-degree, 40-degree or 60-degreeScissor yoke includedOutput:Total Lumens:

The Par Z100 3K is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 100W warm white C.O.B. (Chip On Board) LED with a color temperature of 5300K. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options.The Par Z100 3K allows lighting and stage designers the look of the traditional stage par with the technological conveniences of modern day lighting. The advantages include low power draw, fixture and performers won’t get hot on stage, DMX control of dimming and strobe. There are no dimmer controllers need. The fixture comes with a gel frame in which diffusion filters may be inserted to further change the beam angle.Optical:100 Watt COB Warm White LED (3000K)Life expectancy: rated at 50,000 hrs.LUX: 7874 (9°); 4900 (15°); 2467 (20°); 1397 (25°); 896 (30°)CRI: 90Beam angle: 9, 15, 20, 25 0r 30-degree (manual adjustment) PWM frequency:1200HzConnection:DMX: 5-pin DMX In/OutpowerCON In/Out to power battery or daisy chain fixtureControl:Control protocol: DMX-5122 DMX ChannelsFeatures:4-button DMX menu display on rear panelAdjustable latch to manually change beam angleIncludes gel frame for diffusion filters (Diffusion filter sold separately)Strobe effect (25Hz max)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleElectrical:Power Draw Total (All LED's @ Full On): 115W, 0.964A @ 120V/60Hz, 112W, 0.5A @ 220V/50HzMulti-voltage operation: AC 100-240V, 50/60Hz Daisy chain: 15 fixtures (120V); 25 fixtures (230V)Dimensions / Weight:Dimensions (LxWxH): 19.5” x 10.75” x 10.75” / 491 x 272 x 273mmWeight: 7.5 lbs. / 3.4kg.

The Par ZP100 3K is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 100W warm white C.O.B. (Chip On Board) LED with a color temperature of 3000K. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options. Its external housing is a traditional Par Can silver polished aluminum.The Par ZP100 3K allows lighting and stage designers the look of the traditional stage par with the technological conveniences of modern day lighting. The advantages include low power draw, fixture and performers won’t get hot on stage, DMX control of dimming and strobe. There are no dimmer controllers need. The fixture comes with a gel frame in which diffusion filters may be inserted to further change the beam angle.Optical:100 Watt COB Warm White LED (3000K)Life expectancy: rated at 50,000 hrs.LUX: 7135 (9°); 4440 (15°); 2236 (20°); 1266 (25°); 812 (30°)CRI: 90Beam angle: 9, 15, 20, 25 0r 30-degree (manual adjustment) PWM frequency:1200HzConnection:DMX: 5-pin DMX In/OutpowerCON In/Out to power battery or daisy chain fixtureControl:Control protocol: DMX-5122 DMX ChannelsFeatures:4-button DMX menu display on rear panelAdjustable latch to manually change beam angleIncludes gel frame for diffusion filters (Diffusion filter sold separately)Strobe effect (25Hz max)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleSilver polished aluminum exterior housingElectrical:Power Draw Total (All LED's @ Full On): 115W, 0.964A @ 120V/60Hz, 112W, 0.5A @ 220V/50HzMulti-voltage operation: AC 100-240V, 50/60Hz Daisy chain: 15 fixtures (120V); 25 fixtures (230V)Dimensions / Weight:Dimensions (LxWxH): 19.5” x 10.75” x 10.75” / 491 x 272 x 273mmWeight: 7.5 lbs. / 3.4kg.

The Saber Bar 6 is a 6-head pinspot lighting system mounted on a 1-meter linear base with built-in power and DMX connections. Each pinspot is similar to the Saber Spot WW with a 15W Warm White LED (3100K) and an ACL lens that produces a razor sharp 4-degree beam. Each fixture’s X/Y axis may be individually adjusted manually for precision angling of the beams. There are two heavy duty adjustable brackets to mount the fixture to a ceiling or truss.The rear panel features a display with function buttons, 3-pin and 5-pin DMX In/Out to link data and power locking In/Out connections to daisy chain power. There are multiple DMX channel modes to choose from, built-in programs and 6 dimming curve modes. The Saber Bar 6 is s ideal for performance stages, installations, table spotting and lighting in retail stores.Light Source:LED: 6x 15W Warm White LEDs (50,000 hr.)Color Temperature: 3100KCRI: 96Beam Angle: 5-degreesFeatures:All metal construction with black housingACL lens for razor sharp beamsIncludes heavy duty adjustable brackets for hangingIndividually adjust X/Y axis of each fixture manuallyConstruction:Display with function buttons Data In/Out: 3-pin and 5-pin DMX In/Out to link dataPower locking In/Out connections to daisy chain powerDaisy chain up to 11 fixtures @ 120V; 12 fixtures @ 240VControl:Multiple DMX channel modesControl Modes: DMX512, RDMBuilt-in internal programs0-100% Dimming + smooth 16-bit fine dimming6 Dimming Curve ModesAdjustable LED refresh rateStrobe & Pulse effectsElectrical:Power voltage: AC100-240V, 50/60Hz (Multi-voltage)Power consumption: 85W maxDimensions & Weight:Dimension (LxWxH): 39.5” x 11.5” x 3.75” / 1015x292x90mmWeight: 25 lbs. / 11.3 kg.

Building on the success of its predecessor, the ADJ Lighting Saber Spot RGBL expands on the versatility of the modern LED pinspot. Featuring a 20-Watt RGBL (red, blue, green and lime) LEDs source, advanced ACL lens and a tight 5.7-degree beam angle, the Saber Spot RGBL is designed for spotting tables, objects or mirror balls, and creating mid-air beam effects for lightshows.This fixture is DMX and RDM compliant with 12 DMX channel modes, 63 built-in color macros, 13 built-in color changing programs and has white color temperature presets ranging from 2000K to 9900K.A lens kit is supplied with the fixture giving lighting designers the option to change the beam angle to 10 or 45-degrees. Its scissor yoke allows for a variety of hanging options.The Saber Spot RGBL has a 4-button digital display to navigate through the features and controls, plus indoor power locking In/Thru and 5-pin DMX In/Out pigtails are neatly situated at back of the fixture.SPECIFICATIONSource:• Light Source: 20-Watt, RGBL LED• LED Life Expectancy: 30,000 Hrs• Beam Angle: 5.7°• Includes 2 interchangeable Frost Filter Lens (10-degree & 45-degree)• LED Refresh Rate: 3.6KHzFeatures:• DMX and RDM Compliant• Color Temperature Presets (2000K – 9900K)• 63 Built-in Color Macros• 13 Built-in Color Changing Programs• 4-button Digital Display for easy navigation• Electronic Dimming 0 – 100%• Includes a Scissor Yoke to be hung, or set on the groundConnections:• Power Input: Indoor Power Locking• Power Pass through: Indoor Power Locking• Control: 5-pin DMX In/Out Pigtails• With Wired Digital Communication NetworkControl:• 12 DMX Channel Modes: 3 HSI/4 RGBL/4 HSI+/5 RGBL/6 sRGBLI/6 RGBL/7 RGBL/8 RGBL/8 16bit/10 HSI/12 sRGBLI/13 RGBL• RDM CompliantElectrical:• Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)• Power draw:16.7W• Power Linking: 95pcs @230VDimensions & weight:• Dimensions (LxWxH): 170 x 135 x 215mm• Weight: 1.45 kg.• Black Die Cast HousingApprovals/Ratings:• CE• ETL (Pending)• IP20What's Included:• 1.83m Indoor locking power cord• 2 Frost Filter Lens (10-degree & 45-degree)• Metal clip ring for frost filter lens

The Saber Spot RGBW is a compact Pinspot with smooth RGBW color mixing from one 15W 4-in-1 Quad LED, and features DMX-512, flicker-free operation, 64 built-in color macros, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.The Saber Spot RGBW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.Features:Compact LED Pinspot with ACL lens for a tight, razor sharp beam4-button LED display on rear panelScissor bracket system allows fixture to be hung or set on the groundRun all night – No duty cycleSmooth RGBW color mixing (fast or slow color change operation)Flicker-free operation for film and television 9 built-in Color MacrosColor strobe effect Electronic Dimming: 0 - 100% Beam angle: 4-degree Specifications:15-Watt LED (4-in-1) Quad RGBW LED11 DMX Channel modes: 3/4/4/5/6/6/8/8/9/11/12 channel modes 6 Operational modes: Static Color Mode; Color Change Mode; Color Fade Mode; Auto Run Mode; Sound Active Mode and DMX-512 ModeLinkable via 3-pin XLR cables (In/Out)Power Draw: 14W maxLong Life LEDs (10,000 hrs.)3-pin XLR In/Out pigtailspowerCON In/OutMulti-voltage operation: 100-240V, 47/63HzDimensions (LxWxH): 3.5” x 6.75” x 3.5”/ 88 x170 x 87mmWeight: 2.6 lbs. /1.2 kgs.

The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.Features:Compact LED Pinspot with ACL lens for a tight, razor sharp beam4-button LED display on rear panelScissor bracket system allows fixture to be hung or set on the groundRun all night – No duty cycleFlicker-free operation for film and televisionStrobe effect Electronic Dimming: 0 - 100% Beam angle: 4-degreeSpecifications:15-Watt Warm White LED2 DMX Channel modes: 1 or 2 channel modes Linkable via 3-pin XLR cables (In/Out)Power Draw: 15W maxLong Life LEDs (10,000 hrs.)3-pin XLR In/Out pigtailspowerCON In/OutMulti-voltage: 100-240V, 47/63HzDimensions (LxWxH): 3.5” x 6.75” x 3.5”/ 88 x170 x 87mmWeight: 2.6 lbs. /1.2 kgs

Ehrlich Battery-Powered Wash Light 9x18W RGBWA+UV | IP65 | Wireless DMXThe powerful Ehrlich Battery Wash Light features 9x18W 6-in-1 LEDs (RGBWA+UV) for brilliant color mixing and versatile applications – completely wireless!Equipped with a 16,000mAh lithium battery, it delivers hours of reliable operation, making it ideal for events, stages, and outdoor applications. Thanks to its IP65 waterproof rating, the fixture is perfectly suited for outdoor use, even in challenging weather conditions.With Wireless DMX, infrared remote control, and automatic or sound-active modes, the unit offers flexible control options. The 3000Hz PWM frequency ensures flicker-free performance, making it perfect for TV productions, streaming, and photography.Highlights:9x18W 6-in-1 LEDs (RGBWA+UV)16.7 million color options16,000mAh battery for wireless operationControl modes: DMX512, Wireless DMX512, IRC, master/slave, auto, sound activeBuilt-in programs: color change, color strobe, color dimmer, smooth color transitionsIP65 – suitable for outdoor use25° beam angle & 16,000 Lux @ 1mFlicker-free for HD video thanks to 3000Hz PWMCompact dimensions: 26 × 26 × 26 cmPerfect for: DJs, event lighting, stage setups, architectural lighting, weddings, and outdoor events.

Handy and powerfulEquipped with 4 x 18 W HEX LEDs in red, green, blue, white, amber and UVWith integrated wireless receiver for WDMX operatingOperation via mains connection or built-in lithium-ion battery with up to 30 hours of operation (single color operation)Integrated automatic charging with charge indicatorAs well as via WLAN (APP for IOS and Android)With integrated kickstand, for angled InstallationDMX-controlled operation or stand alone operation with Master / Slave function6 or 10 DMX channels selectableFunctions: static colors, stepless RGBW color blend, internal programs, dimmer, strobe effect with adjustable speed, music controlDimmer speed (step response) adjustableAddressing via control panel with 4-digit LED displaySwitching power supply for power supply between 100 and 240 voltsReady for connection via enclosed power supply cable with safety plugThrough output allows to power up to 8 devicesDMX512 control via regular DMX controllerDimensions: 235 x 210 x 230 mmWeight: 3.2 kg

consists of:6 pcs Ehrlich Accu 418 LED Cube MKII (ER-ACCU-418)and1 pc Case including charging station

consists of:6 pcs Ehrlich Accu 418 LED Cube MKII white (ER-ACCU-418W)and1 pc Case including charging station

Handy and powerful Equipped with 4 x 18 W HEX LEDs in red, green, blue, white, amber and UV, white ItemWith integrated wireless receiver for WDMX operatingOperation via mains connection or built-in lithium-ion battery with up to 30 hours of operation (single color operation)Integrated automatic charging with charge indicatorAs well as via WLAN (APP for IOS and Android)With integrated kickstand, for angled InstallationDMX-controlled operation or stand alone operation with Master / Slave function6 or 10 DMX channels selectableFunctions: static colors, stepless RGBW color blend, internal programs, dimmer, strobe effect with adjustable speed, music controlDimmer speed (step response) adjustableAddressing via control panel with 4-digit LED displaySwitching power supply for power supply between 100 and 240 voltsReady for connection via enclosed power supply cable with safety plugThrough output allows to power up to 8 devicesDMX512 control via regular DMX controllerDimensions: 235 x 210 x 230 mmWeight: 3.2 kg